Of course, if the machine is currently full of water, you’ll want to remove that in as contained a way as you can first, before unlatching the door. You will also see a green ring attached to a string This string will unlatch the washing machine’s door. Once the door is removed, you will see a small plastic cap, with wings you can easily unscrew by hand. However, be very careful, as the edges of the door are very sharp. This will compress a tab, and rotating the hole clockwise should allow the door to come free. Next, you will want to stick the drill bit or small screwdriver into the hole. You will see that the door has a small round hole in the door you will need a small screwdriver or small drill bit that fits in the hole. Firstly you will need to find the circular door at the lower right-hand corner at the front of the machine. ![]() Once you have all of the necessary tools at hand, follow the instructions below to hopefully resolve the drainage problem. ![]() Also, with this repair particularly, you should have a pair of thick gloves, as you may encounter extremely sharp edges with some of the parts you may need to handle.Hopefully, your machine is displaying this error while it is in an empty state if not, well, you and/or your floor may get a bit wet, so make sure to have plenty of towels, or ideally a wet and dry vacuum cleaner on hand to clean up the impending mess.
0 Comments
Leave a Reply. |